Draytek Vigor 2830VN Wireless N Single Band ADSL2/2+ VOIP Router

Draytek Vigor 2830VN Wireless N Single Band ADSL2/2+ VOIP Router

The Vigor 2830Vn provides two analogue phone ports and an analogue line port provide full PSTN and VoIP integration on the same phones, via both the Internet and your regular analogue line. The two phones can be used independently and simultaneously for both incoming and outgoing calls.

As well as the two telephone ports, a third port, the Analogue Line port, connects into your regular analogue line (PSTN/POTS*). This then gives the telephones access to your analogue line to allow you to make calls as well as your VoIP facility (you can select the PSTN line instead of VoIP by dialling #0). Incoming calls are automatically switched through to your telephone(s) (either one or both) so that each phone can be used for both VoIP and POTS calls. Both telephones plugged into your router have access to VoIP and your analogue line. In addition, using the 'Digit-Map' facility you can set rules about particular call destinations using either the POTS line or your SIP/VoIP service. For example, local calls can be routed via your PSTN line (if you have a free calls package for example) whereas international calls can go via your preferred VoIP provider; there is flexibility to have several digit-map rules.

As well as connecting with a SIP/VoIP gateway directly (such as DrayTEL), the vigor2830Vn can register its phones as extensions on a remote IP PBX, such as DrayTek's Vigor IPPBX products, so this is an idea teleworker solution.

• Two 'FXS' Phone Ports
• Line Port for connection to analogue (POTS) line
• Automatic phone switch-over for incoming calls on either PSTN or VoIP
• Hotline Facility (Dial preset number when handset lifted)
• Digit-Map facility for LCR selection
• Protocols: SIP, RTP / RTCP
• 12 SIP Registrar Accounts (for up to 12 VoIP providers/Trunks)
• Compatible as remote extensions on DrayTek IP PBXs
• G.168 Line Echo-cancellation
• Automatic Gain Control
• Jitter Buffer ( 125ms )
• Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
• DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
• FAX / Modem Support G.711 Pass-through
• T.38 for FAX

Specifications

Product Description	Draytek Vigor 2830VN Wireless N Single Band ADSL2/2+ VOIP Router
Device Type	Wireless Router
VoIP	2-port FXS Phone Ports
Lan Ports	4 X Gigabit Ethernet (1000Mb/s) Ports Port-Based VLAN (Inclusive/Exclusive Groups) 802.1q VLAN Tagging
Wan Ports	ADSL Port Compliant with: ANSI T1.413 Issue2 ITU-T G.992.1 G.dmt (ADSL) ITU-T G.992.3 ADSL2 ITU-T G.992.5 ADSL2+ Annex L (READSL) Annex A Annex M ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
Other Ports	Gigabit (1000Mb/s)) Ethernet for load balance and WAN failover USB Port for 3G Cellular Modem or Printer
Wireless LAN Features	802.11n Switchable Dual-Band (2.4Ghz or 5.8Ghz) MIMO Technology with three aerials (2T3R)
WAN Protocols (Ethernet)	DHCP Client Static IP PPPoE PPTP L2TP BPA
Dimensions	L240.96 * W165.07 * H43.96 ( mm )
Warranty	Two (2) Years RTB