Crucial 1GB PC5300 DDR2 RAM

Boost your desktop PC system with this ultra-fast DDR2 memory module. Precision made by industry leaders Crucial Bringing you a smart and efficient computing operation. 512MB is the minimum amount of RAM required when setting your desktop computer up for Windows Vista capability, and here you gain a whole gigabyte, twice the size of 512MB. Extra memory makes your computer run faster and perform better under busy conditions.

Specifications

Product Description	Crucial 1GB Memory - CT12864AA667
Storage Capacity	1 GB
Upgrade Type	Generic
Technology	DDR2 SDRAM
Memory Speed	667 MHz (PC2-5300)
Form Factor	DIMM 240-pin
CAS Latency	CL=5
Features	Unbuffered
Data Integrity Check	NON-ECC
Supply Voltage	1.8V
Component configuration	128 Meg x 64
Manufacturer Warranty	Limited lifetime warranty

A Closer Look

240-pin DIMM

A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.

240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast.

Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix™ and Ballistix Tracer™ high-performance memory do not come in 72-bit or registered modules.)

Standard DDR2 240-pin DIMMs are available in DDR2 PC2-3200 SDRAM, DDR2 PC2-4200 SDRAM, DDR2 PC2-5300 SDRAM, and PC2-6400 SDRAM.

To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket.

The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.